MLT
PK 240 MLT
Quick cycles, full rotation
Loader Crane
Key Specs
- Max. lifting moment
- 22.6 mt
- Max. lifting capacity
- 6,400 kg
- Max. hydraulic outreach
- 17.3 m
MLT cranes deliver the multipurpose capability to work efficiently, comfortably, and safely every day. The PK 240 MLT is a quick-cycle crane with full-rotation movement around truck–trailer combinations. Speed+ enables up to 25% more speed in building material handling, bulk handling, and general construction projects.
Technical Specifications
Technical data
- Max. lifting moment
- 22.6 mt
- Max. lifting capacity
- 6,400 kg
- Max. hydraulic outreach
- 17.3 m
- Max. manual outreach
- 21.5 m
- Max. operating pressure
- 375 bar
- Dead weight (std)
- 2,750 kg
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting capacities
|
Crane Height (mm) |
Crane Weight (kg) |
Crane Width (mm) |
Installation Width (mm) |
Lifting moment (mt) |
Outreach (m) |
Pressure (MPa) |
Pump capacity (l/min) |
Slewing angle (°) |
Slewing torque (mt) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| B | 2,380 mm | 2,750 kg | 2,530 mm | 1,030 mm | 21.4 mt | 10.5 m | 37.5 Mpa | 90 - 120 l/min | ∞ | 2.8 mt |
| C | 2,380 mm | 2,890 kg | 2,530 mm | 1,030 mm | 21 mt | 12.8 m | 37.5 Mpa | 90 - 120 l/min | ∞ | 2.8 mt |
| D | 2,380 mm | 3,010 kg | 2,530 mm | 1,100 mm | 20.6 mt | 15 m | 37.5 Mpa | 90 - 120 l/min | ∞ | 2.8 mt |
| E | 2,380 mm | 3,120 kg | 2,530 mm | 1,100 mm | 20.2 mt | 17.3 m | 37.5 Mpa | 90 - 120 l/min | ∞ | 2.8 mt |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
HPSC – Smart Stability, More Reach
High Performance Stability Control (HPSC) continuously calculates crane stability based on the real position of the stabilizers. The system automatically adjusts the permitted working range for each setup situation, maximizing the lifting capacity even when space is limited. This improves safety, increases usable reach, and gives the operator clear, reliable guidance during crane operation.
HPLS – On-demand extra power
High Power Lifting System (HPLS) increases lifting capacity by up to 15% when required by automatically boosting hydraulic pressure. Lifting speed is reduced at the same time to maintain control and precision. This allows heavier loads to be handled safely, improves lift-to-weight performance, and reduces stress on the crane structure—helping extend service life and protect long-term value.
POWER LINK PLUS – Maximum Flexibility
Power Link Plus reverse linkage system allowis the knuckle boom to tilt upward by up to 15° beyond horizontal. This increased flexibility supports safe and efficient lifting in confined spaces and around obstacles. At the same time, the crane folds compactly on the truck within legal height limits, delivering smooth movements, high precision, and reliable performance in demanding applications.
Soft Stop – Smooth, Controlled Motion
Soft Stop gently slows crane movements before mechanical end positions are reached. This prevents sudden stops, reduces load swing, and protects the crane structure, load, and vehicle. Smoother motion improves precision, increases operator confidence, and allows faster, more accurate work while reducing wear and stress on key components during daily operation.
Optional Features
HPSC-Plus LOAD – Smarter Use of Power
HPSC-Plus LOAD adjusts crane performance based on the truck's load and vehicle's inclination. The system automatically calculates the optimal lifting limits whether the truck is empty, partially loaded, or fully loaded. This enables greater usable reach while maintaining full stability, without requiring any action from the operator, and ensures safe, efficient lifting in every loading condition.
Leveling Assistant – Faster Crane Setup
Leveling Assistant levels the vehicle quickly and accurately during crane setup. With a single lever input, stabilizers move semi-automatically until optimal leveling is reached. This reduces setup time by up to 80%, improves stability, and ensures correct crane positioning for each job. Simple operation and precise leveling increase safety, efficiency, and operator comfort on every work site.
Fly Jib – Extended Reach and Flexibility
Fly jib extends the crane’s working range for lifting at greater heights and distances. Additional reach enables access over obstacles, improved positioning in tight spaces, and more flexibility on complex job sites. Precise control and stable performance support efficient handling of loads that would otherwise be out of reach, expanding the crane’s usable applications.
P-Fold – One-Lever Crane Setup
P-Fold automates crane folding and unfolding using a single control lever. The system coordinates all boom and fly jib movements. It can also manage the winch automatically. This significantly reduces setup and stowage time, prevents damage during folding, and guides operators safely through the process—making crane handling faster, simpler, and more reliable, even for less experienced users.
Lane Lock – Protect Dangerous Zones
Lane Lock prevents unintended crane slewing into dangerous areas such as traffic lanes or restricted zones. A defined slewing range can be locked to the left or right of the vehicle using the remote control. This reduces accident risk, improves job site safety, and allows the operator to work with greater confidence near hazards.
Slewing Lock – Custom Safety Limits
Slewing Lock blocks individually defined slewing angles to protect restricted or hazardous areas. Two limit points are easily set via the radio remote control, regardless of vehicle position. This provides precise control, prevents unwanted movements, and increases safety when working close to buildings, traffic, or sensitive infrastructure.