Special
PK 23.001L TEC 3
Loader Crane
Key Specs
- Max. lifting moment
- 22.9 mt
- Max. lifting capacity
- 5,650 kg
- Max. hydraulic outreach
- 16.3 m
PALFINGER’s L-type loader cranes throw a bridge between power and versatility, combining strength, control, and convenience. The easy-to-operate TEC 3 models are precise, practical lifting solutions for everyday use. The HPSC system ensures full lifting capacity even in confined spaces, such as urban construction sites.
Technical Specifications
Technical data
- Max. lifting moment
- 22.9 mt
- Max. lifting capacity
- 5,650 kg
- Max. hydraulic outreach
- 16.3 m
- Slewing angle
- 440°
- Slewing torque
- 2.7 mt
- Stabilizer spread (std)
- 6.6 m
- Max. operating pressure
- 340 bar
- Recommended pump capacity <br> Top seat RSQ240
- 50 - 70 l/min
- Recommended pump capacity <br> Top seat RSQ240 LS
- 65 - 90 l/min
- Recommended pump capacity <br>Top seat PVG32 LS
- 85 - 110 l/min
- Dead weight (std)
- 2,700 kg
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting capacities
|
Crane Height (mm) |
Crane Weight (kg) |
Crane Width (mm) |
Lifting moment (mt) |
Outreach (m) |
Pressure (MPa) |
Pump capacity (l/min) |
Slewing angle (°) |
Slewing torque (mt) |
|
|---|---|---|---|---|---|---|---|---|---|
| A | 2,430 mm | 2,700 kg | 2,550 mm | 22.2 mt | 11.1 m | 34 bar | 50-110 | 440 | 2.7 |
| B | 2,430 mm | 2,865 kg | 2,550 mm | 21.6 mt | 13.7 m | 34 bar | 50-110 | 440 | 2.7 |
| C | 2,430 mm | 3,020 kg | 2,550 mm | 21 mt | 16.3 m | 34 bar | 50-110 | 440 | 2.7 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Low-Maintenance Extension System
Low-maintenance extension system eliminates the need for regular greasing by using self-lubricating synthetic sliding elements and corrosion-resistant coating. This keeps the boom clean, reduces service effort, and prevents lubricant contamination of loads or work areas. Smoother extension movements, lower maintenance costs, and longer service life improve overall efficiency and resale value.
Radio Remote Control – Full Control
Radio remote control system operates the crane safely and efficiently from a distance. Operator commands are transmitted wirelessly delivering precise hydraulic movements. This enables clear visibility of the load, one-person operation, and allows work outside danger zones. Adjustable controls, speed settings, and built-in safety shutoffs improve comfort, accuracy, and overall job site safety.
PALTRONIC – Smart Crane Control
PALTRONIC control electronics continuously monitor crane load, position, and stability in real time. Sensors send data to the system, which automatically activates safety, assistance, and performance functions when needed. This results in smoother movements, overload protection, improved stability, and easier operation—allowing the operator to focus fully on safe, precise load handling.
HPSC – Smart Stability, More Reach
High Performance Stability Control (HPSC) continuously calculates crane stability based on the real position of the stabilizers. The system automatically adjusts the permitted working range for each setup situation, maximizing the lifting capacity even when space is limited. This improves safety, increases usable reach, and gives the operator clear, reliable guidance during crane operation.
