Mechanic Trucks

PAL Pro 86

The crane body solution

Product group:
up to 86,000 ft lbs

The PAL Pro  86 was designed to accept up to a 86,000 ft/lb crane. This crane body allows for maximum utilization of compartment space and rear bumper access to the bed. The integrated substructure is designed with a hybrid torsion box, outrigger housing and rear shear plate body mounts to eliminate truck frame and side pack deflection while supporting crane loads and providing vehicle stabilization.

Product hotspots

 Hybrid torsion box  Structural steel cross-members  Integrated outrigger housing  Front flange body mounts  Rear shear plate body mounts

Hybrid torsion box

Eliminates truck frame and side pack deflection, 10 ga grade 50 galvanealed steel construction

Structural steel cross-members

Tubular 3”x 5” structural steel, interlaced with torsion box

Integrated outrigger housing

Steel plates incorporate outrigger housing to torsional box and crane compartment

Front flange body mounts

Linear adjustable flange mounting system to tie body to chassis frame.

Rear shear plate body mounts

Steel plates prevent lateral shifting of body on chassis. Shear plates provide support to crane loads and vehicle stabilization

Technical data

Mechanic Truck PAL Pro
Linear adjustable front mounts std
Full length stainless steel hinges std
Door construction with structural adhesive std
Compression 3 Point T handle latches std
12ga A60 2 sided galvanealed zinc coated steel std
Rubber mounted LED lights std
E-coat primer std

Standard features

• Crane Compartment: Reinforced 1” top plate and 5/16” side plates. Hose reel mounting shelf and access. Standard door activated LED lighting.

• Door design: Double panel doors with internal C-channel stiffeners, bonded with structural adhesive.

• Work bench tailshelf: Work surface depth of 30”, with 5/16” smooth steel top-plate. Full width through compartment, with reinforced pintle hitch plate and 2" hitch receiver tube.

• Hinges: Stainless-steel hinge with concealed leaves and full length rod type 7/16” diameter pin. E-coated prior to door installation.

• Latches: Folding T compression latch, with internal ring plate installation. Three point standard with 3/8” rods.

• Tailgate design: Double panel 14” high slam tailgate with single hand latch and hidden hinge stop to 90 degrees.

Options

• Boom support: Optional fixed or adjustable non marring boom support E coated black.

• Drawer assemblies: Numerous configurations with 3”, 5”, and 7” high drawer sizes.

• Outriggers: Standard power down stabilizer legs, with optional power or manual extend configurations.

• Shelf and divider features: Formed and hemmed galvanized steel construction. Adjustable height shelves in divided and non-divided styles.