Multi

HT 400

  1. Go back
  2. Home
  3. Products
  4. Hooklifts
  5. Models
  6. HT 400

Tandem Axle

Hooklift
Imperial Metric
Hook Height 54" | 61 ¾"
Container Length 14 – 23 ft
Min GVWR 54,000 lbs.
Technical Data

This model features a telescoping (54 or 61 3/4 inch) jib with dual main cylinders.

40,000 lbs. capacity

Downloads
Lift / DumpCapacity (lb.) CA Range (in.) Min. GVWR (lb.) Min RBM (in. lb.) Hooklift length Clear Frame Rail (in.) Body Length Range (ft.) Optimum Body Lenghts (ft.) Jib Height (in.) Jib Action Max. Dump Angle Pivot # of Lift / Dump Cylinders Operating Pressure (PSI) Pump Type Fitting Hoses Shipping Weight (lb.) Paint Construction
S 40000 144-150" 54000 N/A 200 205 14-18' 16-18' 54'' & 61.75'' Telescopic 50 degrees Dual 2/2 4500 Piston - Direct mount JIC/SAE 4510 Finish Coat A514 (T-1)
L 40000 185-195" 54000 N/A 237 242 16-22' 20-22' 54'' & 61.75'' Telescopic 48 degrees Dual 2/2 4500 Piston - Direct mount JIC/SAE 4840 Finish Coat A514 (T-1)
Lift / DumpCapacity (lb.) CA Range (in.) Min. GVWR (lb.) Min RBM (in. lb.) Hooklift length Clear Frame Rail (in.) Body Length Range (ft.) Optimum Body Lenghts (ft.) Jib Height (in.) Jib Action Max. Dump Angle Pivot # of Lift / Dump Cylinders Operating Pressure (PSI) Pump Type Fitting Hoses Shipping Weight (lb.) Paint Construction
S 18144 144-150" 54000 N/A 508 521 4.27-5.49 m 4.88-5.49 m 137.16 cm & 156.8 cm Telescopic 50 degrees Dual 1/1 310 Piston - Direct mount JIC/SAE 2046 Finish Coat A514 (T-1)
L 18144 185-195" 54000 N/A 602 615 4.88-6.70 m 6.10-6.71 m 137.16 cm & 156.8 cm Telescopic 48 degrees Dual 2/2 310 Piston - Direct mount JIC/SAE 2196 Finish Coat A514 (T-1)
  • Dual Pivot Design
    • Flexible design with true dumping capabilities
  • High Pressure Hydraulics (3,600 psi to 4,500 psi)
    • Allows system to take advantage of smaller cylinders, sving you weight and increases your available payload.
  • Container Hold Downs
    • Inside on T-12, PHT-16, and T-20 models
    • Outside on all other models
      • Adjustable (forward and back) on PHT-22
  • Dual Lift/Dump Cylinders
    • Steady and secure handling of bodies during loading, unloading and dumping operations
  • Dual Counter Balance Valves
    • Safety feature providing power up and power down
    • Accessible and serviceable
  • Dual Rear Rollers standard on T-40 models and up
  • Soft Stop Landing standard on T-29 and up
  • Telescopic jib
  • High strength steel supports
    • No wearable/replaceable pads
  • Adjustable Height Jib
    • Hydraulic optional on T-29S, T29-M - 36" and 54"
    • Manual standard on T-40 and up - 54" and 62"
  • Inside Controls
  • Greasable with bronze bushings at all pviot points
  • High strength steel frame - Z rail design
  • Safety sensors
    • Jib sensor ensures the jib cannot retract while in dump mode (all models)
    • Dump latch sensor ensures the latches are fully engated (all models)
    • Soft stop sensor ensures gentle landing of body after dumping (T-29 and up)
  • 3-Year Limited Warranty
Downloads

Brochures

Container Solutions

11,32 MB Download