Light
PK 9.501 SLD 5
- breadcrumb.back
- breadcrumb.start
- Products
- Loader Cranes
- Models
- PK 9.501 SLD 5
PK 9.501 SLD 5
INTELLIGENT LIGHTWEIGHT DESIGN OFFERS AN OPTIMIZED MOUNTING CONCEPT
- Shorter load cycle times due to High Speed extension
- High operator friendliness thanks to radio remote control
- Maximum utilisation of the working range due to HPSC
- More lifting power due to A-HPLS
High Power Lifting System
The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.
Max. lifting moment | 9.0 techunit.mt |
Max. lifting capacity | 5700 techunit.kg |
Max. hydraulic outreach | 11.8 techunit.m |
Max. manual outreach | 15.8 techunit.m |
Slewing angle | 400° |
Slewing torque | 1.0 techunit.mt |
Stabilizer spread (std) | 3.2 m |
Fitting space required (std) | 0.72 techunit.m |
Width folded | 2.32 techunit.m |
Max. operating pressure | 360 techunit.bar |
Pump capacity | 40 - 50 l/min |
Dead weight (std) | 1080 techunit.kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
9.0 | 5.6 | 400 | 1.0 | 36.0 | 40-50 | 1080 | 2005 | 2300 | 720 | |
8.7 | 7.6 | 400 | 1.0 | 36.0 | 40-50 | 1170 | 2005 | 2300 | 720 | |
8.5 | 9.7 | 400 | 1.0 | 36.0 | 40-50 | 1270 | 2005 | 2300 | 720 | |
8.3 | 11.8 | 400 | 1.0 | 36.0 | 40-50 | 1350 | 2005 | 2300 | 720 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Crane Passion & Produkt-pdfs
download-modal.request CRANE TOOLS
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?