Medium

PK 36502 High Performance

  1. Go back
  2. Home
  3. Products
  4. Loader Cranes
  5. Models
  6. PK 36502 High Performance

PK 36502 High Performance

Loader Crane

Powerful performance with low dead weight and high efficiency.

  • High value retention thanks to coating technology
  • Additional applications due to Power Link Plus
  • Maximum utilisation of the working range due to HPSC
  • Shorter load cycle times due to High Speed Extention
Downloads Technical Data

Low-maintenance extension system

With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.

Power Link Plus

The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.

Details

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Max. lifting moment 34.5 mt
Max. lifting capacity 13200 kg
Max. hydraulic outreach 16.3 m
Max. manual outreach 23.3 m
Slewing angle 400°
Slewing torque 4.0 mt
Stabilizer spread (std) 6.6 m
Fitting space required (std) 1.28 m
Width folded 2.55 m
Max. operating pressure 320 bar
Pump capacity 80 - 100 l/min
Dead weight (std) 3800 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
A 32.9 7.6 400 4.0 32.0 60-80 3800 2470 2550 1280
B 32.2 9.6 400 4.0 32.0 60-80 4040 2470 2550 1280
C 31.5 11.7 400 4.0 32.0 60-80 4290 2470 2550 1280
D 30.8 14.0 400 4.0 32.0 60-80 4530 2470 2550 1280
E 30.3 16.3 400 4.0 32.0 60-80 4740 2470 2550 1280

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 36502 / PK 41002 EH

3,43 MB Download

CRANE TOOLS

26,88 MB Download