Heavy
PK 480 TEC
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 480 TEC
PK 480 TEC
- More intelligent operation with PALTRONIC 180 control electronics
- Extra smooth control thanks to LX-6 control valve
- Very stiff and light boom system thanks to P-Profile
- More efficient and faster due to continuous slewing system
- High user friendliness due to in-house developed radio remote control PALcom P7
- More efficiency with fly jib due to DPS-C
- Maximum utilisation of the working range thanks to extended HPSC
- More lifting power due to S-HPLS
- Practical and attractive due to Functional Design
Smart Control
With Smart Control, the operator of a TEC crane turns hard work into smart work and can control a horizontal or vertical movement of the crane tip with only one lever. The intuitive control of the tip allows a diagonal movement as well as any curve by combining both directions.
Memory Position
Save up to 4 crane positions with the Memory Position and return to them again and again with only 2 levers.
Leveling Assistant
The Leveling Assistant supports the crane operator during the stabilizing process by leveling the vehicle efficiently with just one lever movement on the PALcom P7 Radio Remote Control.
P-Fold
P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.
P-Profile
The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.
PALTRONIC 180
The PALTRONIC 180 is the most advanced control electronics for our loader cranes, enabling a safe, precise, and reliable operation. With its state-of-the-art technology, it allows for a variety of innovative assistance systems, such as Memory Position or the Leveling Assistant, and sets the standard for the new TEC generation.
CONTROL VALVE LX-6
The innovative control valve LX-6 enables particularly precise control of the new TEC-range. In combination with our specially developed PALcom P7 radio remote control, this gives the crane operator the best control over the TEC loader crane. As a result, every movement is even more precise and, above all, faster than ever before.
Continuous Slewing System
The PALFINGER Continuous Slewing Mechanism permits an unrestricted radius of action. The crane is rotated or 'slewed' using a gear box and hydraulic motor instead of a rack and pinion system. All endless slewing mechanisms come as standard with a high quality roller ball bearing.
PALFINGER Connected
With a PALFINGER lifting solution, you get a premium device for your assignment. An essential ingredient for every successful job. But that’s not enough for us. As well as providing you with the best device on the market for your lifting requirements, we want to help you deploy your equipment as efficiently as possible.
That’s why we developed PALFINGER CONNECTED. A digital platform that gives you an individually adjustable overview of your entire PALFINGER fleet as well as detailed information on individual devices anytime, anywhere. As a result, you attain maximum availability of your equipment with a minimum of admin work.
RTC
The new RTC (Rope Tension Control) system is an automatic rope tensioning device that helps to fold and unfold the crane. This is a further innovation from PALFINGER that will significantly shorten the set-up time.
Experience the product features
AOS
PRODUCT FEATURES
The patented PALFINGER "AOS" oscillation suppression system cancels out vibrations and blows that occur during crane operation. Any "post-oscillation" is prevented through rapid braking or load changes. The result is a decisive increase to safety in crane operation for employees, the load and building.
HOW IT WORKS
The electronics receive signals from pressure sensors on both sides of the elevating cylinder and interpret them as arm vibrations. The signals for the counter-movement of the elevating cylinder are handled by the control valve. The incurred vibration can be cancelled through the exactly determined frequency and wavelength. The result is damping of the arm to just one or two short vibrations so that the arm comes to an immediate standstill.
* Optional feature/country-specific-equipment
HPSC
PRODUCT FEATURES
The High Performance Stability Control (HPSC) is a fully proportional system for monitoring the stability of the crane vehicle. Sensors for proportional path measurement in the stabilizer supports permit completely variable support positioning. Hence, the permissible, safe working range can be calculated for any support situation.
HOW IT WORKS
The HPSC system calculates the permissible working range for any slewing angle of the boom system and for any support situation. The position of the stabilizer support is detected by means of a cable extension transducer or magnetostrictive position sensor. Based on the intelligent calculation algorithm developed by PALFINGER, it works more efficiently than comparable systems that are available in the market.
HPSC Plus
PALFINGER has continued development of the well-proven stability control system HPSC and is offering additional application-orientated functions in a modular system. Three modules which are available on their own as well as combined, turn HPSC into HPSC-Plus. In this way, the stability control system can be adapted to the current situation and ensure an optimal performance.
* Optional feature/country-specific-equipment
DPS-C
DPS-C enables an increase of lifting power in the cases of fully as well as partly extended crane booms. A length measuring system identifies the current position of the extension booms and the fly jib. In that way, the performance can be optimised across the entire outreach.
* Optional feature/country-specific-equipment
Max. lifting moment | 45.7 mt |
Max. lifting capacity | 16500 kg |
Max. hydraulic outreach | 21.2 m |
Max. manual outreach | 25.9 m |
Slewing angle | ∞ |
Slewing torque with 1 gear | 4.0 mt |
Slewing torque with 2 gears | 5.2 mt |
Stabilizer spread (std) | 7.8 m |
Fitting space required (std) | 1.43 m |
Width folded | 2.55 m |
Max. operating pressure | 385 bar |
Pump capacity | 90 - 120 l/min |
Dead weight (std) | 4300 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
42.7 | 7.9 | ∞ | 4.0 | 38.5 | 90-120 | 4300 | 2460 | 2550 | 1440 | |
41.5 | 9.9 | ∞ | 4.0 | 38.5 | 90-120 | 4530 | 2460 | 2550 | 1440 | |
40.8 | 12.0 | ∞ | 4.0 | 38.5 | 90-120 | 4780 | 2460 | 2550 | 1440 | |
40.0 | 14.3 | ∞ | 5.2 | 38.5 | 90-120 | 5030 | 2460 | 2550 | 1440 | |
39.4 | 16.6 | ∞ | 5.2 | 38.5 | 90-120 | 5240 | 2460 | 2550 | 1525 | |
38.7 | 18.9 | ∞ | 5.2 | 38.5 | 90-120 | 5450 | 2460 | 2550 | 1525 | |
38.3 | 21.2 | ∞ | 5.2 | 38.5 | 90-120 | 5580 | 2460 | 2550 | 1525 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER United Kingdom page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?