Smart Class

P 200 TXE-E Smart Plus

Access Platform

Working Height 20 M

Basket Load 250 KG

Side Reach 10.8

Technical Data

Maximum performance offered by lateral outreach and small stabilisation footprint

Advanced performance telescopic platform mounted on a 3.5 tonne truck
Multifunction electric controls for greater precision, speed, and manoeuvring comfor
Vertical stabilisation with frontwards extending outriggers which compensate for uneven and sloping ground
Platform with three stabilisation possibilities for each working condition:

Within the outer vehicle limits: for maximum compactness overall within small spaces
With front outriggers extended: for maximum performance when working in elevated positions
Partial stabilisation: for maximum performance with minimum overall dimensions.

Downloads

Perfection in Action

Images & Videos

Highlights

NEW FEATURE: AUTOMATIC STABILIZATION

The automatic stabilization is a brand-new feature that allows the operator to set-up the access platform quickly and easily at the desired work place with automatic levelling. This can be done via the console installed on the side of the vehicle or directly from the control panel in the basket.

Before using the automatic stabilization, the operator decides whether to extend both outrigger arms to required position. The automatic stabilization cycle continues until two conditions are satisfied: The measured inclination of the frame fits with the set value in the inclinometer and both axes are not any longer in contact with the ground. After that, the process stops automatically, and safe work can begin.

With this feature, road inclinations can be easily and safely compensated. Longitudinally uphill 3° (~ 5%), longitudinally downhill around 4.5° (~ 8%) and crosswise around 3° (5%). If the vehicle is approaching tilt limits, both lengthway and crossway function are automatically being blocked.

Max. height of work	20 m
Max. basket floor height	18 m
Max. horizontal outreach /with basket load	10.8
Slewing range of basket	2 x 90°
max. basket load	250 kg
Workman basket - breadth / length / height	1.4 x 0.85 x 1.1
Angle of main boom	-25° to + 80°
Rotation angle of turntable	370°
Height in transport position	2.87 m
Width in transport position	2.19 m
Length in transport position	7.1 m

*above mentioned values are standard values and vary depending on options and chassis

Units shown are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.