PK 7.001 SLD 3
|Max. lifting moment||6.2 mt|
|Max. lifting capacity||3300 kg|
|Max. hydraulic outreach||11.2 m|
|Max. manual outreach||12.9 m|
|Slewing torque with 1 gear||0.8 mt|
|Stabilizer spread (std)||3.0 m|
|Fitting space required (std)||0.66 m|
|Width folded||2.20 m|
|Max. operating pressure||330 bar|
|Pump capacity||20 - 30 l/min|
|Dead weight (std)||750 kg|
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
|Lifting moment (mt)||Outreach (m)||Slewing angle (°)||Slewing torque (mt)||Pressure (MPa)||Pump capacity (l/min)||Crane Weight (kg)||Crane Height (mm)||Crane Width (mm)||Installation With (mm)|
|Std||6.2||5.5||400||0.8||33.0||20 - 30||750||1930||2200||660|
|C||5.6||11.2||400||0.8||33.0||20 - 30||960||1930||2220||660|
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?