T 29

Single Axle

Hooklift

Imperial Metric

Hook Height

Container Length

Min GVWR

This model features a telescoping (36 or 54 inch) jib and dual main cylinders.

29,000 lbs. capacity

Downloads

	Lift / DumpCapacity (lb.)	CA Range (in.)	Optimum CA (in.)	Min. GVWR (lb.)	Min RBM (in. lb.)	Hooklift length	Clear Frame Rail (in.)	Body Length Range (ft.)	Optimum Body Lenghts (ft.)	Jib Height (in.)	Jib Action	Max. Dump Angle	Pivot	# of Lift / Dump Cylinders	Operating Pressure (PSI)	Pump Type	Fitting Hoses	Shipping Weight (lb.)	Paint	Construction
ST	29000	120-130"	130	33000	N/A	162	167	11-14'	12-14'	54"	Telescopic	50 degrees	Dual	2/2	3625	Piston - Direct mount	JIC/SAE	3190	Primer	A514 (T-1)
S	29000	120-130"	130	33000	N/A	162	167	11-14'	12-14'	36" or 54"	Telescopic	50 degrees	Dual	2/2	3625	Piston - Direct mount	JIC/SAE	3190	Primer	A514 (T-1)
M	29000	130-140"	140	33000	N/A	170	175	12-16'	14-16'	54''	Telescopic	50 degrees	Dual	2/2	3625	Piston - Direct mount	JIC/SAE	3260	Primer	A514 (T-1)
MT	29000	130-140"	140	33000	N/A	170	175	12-16'	14-16'	36'' & 54''	Telescopic	50 degrees	Dual	2/2	3625	Piston - Direct mount	JIC/SAE	3260	Primer	A514 (T-1)
L	29000	150-160"	160	33000	N/A	193	198	4.27-5.79 m	4.8-5.49 m	54''	Telescopic	50 degrees	Dual	2/2	3625	Piston - Direct mount	JIC/SAE	3370	Primer	A514 (T-1)
XL	29000	174-186"	186	33000	N/A	221	226	15-20'	18-20'	54''	Telescopic	47 degrees	Dual	2/2	3625	Piston - Direct mount	JIC/SAE	3370	Primer	A514 (T-1)

	Lift / DumpCapacity (lb.)	CA Range (in.)	Optimum CA (in.)	Min. GVWR (lb.)	Min RBM (in. lb.)	Hooklift length	Clear Frame Rail (in.)	Body Length Range (ft.)	Optimum Body Lenghts (ft.)	Jib Height (in.)	Jib Action	Max. Dump Angle	Pivot	# of Lift / Dump Cylinders	Operating Pressure (PSI)	Pump Type	Fitting Hoses	Shipping Weight (lb.)	Paint	Construction
ST	13154	120-130"	130	33000	N/A	411	424	3.35-4.27 m	3.66-4.27 m	137.16 cm	Telescopic	50 degrees	Dual	2/2	424	Piston - Direct mount	JIC/SAE	1447	Primer	A514 (T-1)
S	13154	120-130"	130	33000	N/A	411	424	3.35-4.27 m	3.66-4.27 m	91.4 cm or 137.16 cm	Telescopic	50 degrees	Dual	2/2	250	Piston - Direct mount	JIC/SAE	1447	Primer	A514 (T-1)
M	13154	130-140"	140	33000	N/A	432	445	3.66-4.88	4.27-4.88 m	137.16 cm	Telescopic	50 degrees	Dual	2/2	250	Piston - Direct mount	JIC/SAE	1479	Primer	A514 (T-1)
MT	13154	130-140"	140	33000	N/A	432	445	3.66-4.88 m	4.27-4.88 m	91.4 cm & 137.16 cm	Telescopic	50 degrees	Dual	2/2	250	Piston - Direct mount	JIC/SAE	1479	Primer	A514 (T-1)
L	13154	150-160"	160	33000	N/A	490	503	4.27-5.49 m	4.88-5.49 m	137.16 cm	Telescopic	50 degrees	Dual	2/2	250	Piston - Direct mount	JIC/SAE	1529	Primer	A514 (T-1)
XL	13154	174-186"	186	33000	N/A	561	574	4.57-6.10 m	5.49-6.10 m	137.16 cm	Telescopic	47 degrees	Dual	2/2	250	Piston - Direct mount	JIC/SAE	1529	Primer	A514 (T-1)

High Pressure Hydraulics (3,600 psi to 4,500 psi)
- Allows system to take advantage of smaller cylinders, sving you weight and increases your available payload.
Container Hold Downs
- Inside on T-12, PHT-16, and T-20 models
- Outside on all other models
  - Adjustable (forward and back) on PHT-22
Dual Lift/Dump Cylinders
- Steady and secure handling of bodies during loading, unloading and dumping operations
Dual Counter Balance Valves
- Safety feature providing power up and power down
- Accessible and serviceable
Dual Rear Rollers standard on T-40 models and up
Soft Stop Landing standard on T-29 and up
Telescopic jib
High strength steel supports
- No wearable/replaceable pads
Adjustable Height Jib
- Hydraulic optional on T-29S, T29-M - 36" and 54"
- Manual standard on T-40 and up - 54" and 62"
Inside Controls
Greasable with bronze bushings at all pviot points
High strength steel frame - Z rail design
Safety sensors
- Jib sensor ensures the jib cannot retract while in dump mode (all models)
- Dump latch sensor ensures the latches are fully engated (all models)
- Soft stop sensor ensures gentle landing of body after dumping (T-29 and up)
3-Year Limited Warranty

Downloads

Select language...

1,04 MB Download

1,09 MB Download

7,37 MB Download