Special
PK 20.501L TEC 3
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 20.501L TEC 3
PK 20.501L TEC 3
High outreach and high operating speed ensure efficient handling of construction material
- Maximum radius of action thanks to slewing angle of 440 degrees
- Optimized lubrication of the slewing mechanism thanks to an oil bath right up to the head bearing
- Avoiding damage of the hydraulic hoses and compact set-up dimensions thanks to the new internal hose guiding system
- Excellent visibility and high operator comfort thanks to new top seat with new joystick control
Images & Videos
Internal hose routing system through the column
Avoiding damage of the hydraulic hoses as well as compact set-up dimensions are possible thanks to the internal hose routing system.
Loading height in close range
Thanks to the very good loading height in close range, the crane can move pallets over the entire loading area.
Slewing Mechanism in Oil Bath
Optimized lubrication of the slewing mechanism thanks to an oil bath right up to the head bearing.
Slewing angle
The slewing angle of 440 degrees enables the maximum radius of action.
P-Profile
The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.
Max. lifting moment | 19.7 mt |
Max. lifting capacity | 5650 kg |
Max. hydraulic outreach | 13.7 m |
Slewing angle | 440° |
Slewing torque | 3.1 mt |
Stabilizer spread (std) | 6.6 m |
Max. operating pressure | 340 bar |
Recommended pump capacity Top seat RSQ240 |
50 - 70 l/min |
Recommended pump capacity Top seat RSQ240 LS |
65 - 90 l/min |
Recommended pump capacity Top seat PVG32 Radio |
85 - 110 l/min |
Dead weight (std) | 2400 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
19.7 | 8.5 | 440 | 2.3 | 34.0 | 50-110 | 2400 | 2430 | 2550 | - | |
19.1 | 11.1 | 440 | 2.3 | 34.0 | 50-110 | 2570 | 2430 | 2550 | - | |
18.4 | 13.7 | 440 | 2.3 | 34.0 | 50-110 | 2730 | 2430 | 2550 | - |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?