Medium
PK 14.501K SLD 5
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 14.501K SLD 5
PK 14.501K SLD 5
MORE PAYLOAD THANKS TO INTELLIGENT LIGHTWEIGHT DESIGN
- High operator friendliness thanks to radio remote control
- Maximum utilisation of the working range due to HPSC
- More lifting power due to A-HPLS
- Higher payloads due to intelligent lightweight design
High Power Lifting System
The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.
Paltronic
With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Single Link Plus
The knuckle joint on the crane's knuckle boom improves the crane's lifting power significantly in typical working positions. This knuckle boom, which has been specially developed by PALFINGER and can be angled upwards, also stands out by virtue of excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.
Max. lifting moment | 14.6 mt |
Max. lifting capacity | 6200 kg |
Max. hydraulic outreach | 11.7 m |
Slewing angle | 420° |
Slewing torque | 1.6 mt |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.74 m |
Width folded | 2.55 m |
Max. operating pressure | 360 bar |
Pump capacity | 50 - 70 l/min |
Dead weight (std) | 1510 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
14.6 | 5.2 | 420 | 1.6 | 36.0 | 50-70 | 1510 | 2215 | 2550 | 740 | |
14.3 | 7.3 | 420 | 1.6 | 36.0 | 50-70 | 1660 | 2215 | 2550 | 740 | |
14.0 | 9.5 | 420 | 1.6 | 36.0 | 50-70 | 1780 | 2215 | 2550 | 740 | |
13.7 | 11.7 | 420 | 1.6 | 36.0 | 50-70 | 1890 | 2215 | 2550 | 740 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?