Medium
PK 11002 High Performance
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 11002 High Performance
PK 11002 High Performance
The compact design and Power Link Plus are attributes for efficiency and cost effectiveness
- Maximum precision and safety due to optional AOS
- High value retention thanks to coating technology
- Maximum reliability due to PAL 50
- Additional applications with Power Link Plus
Images & Videos
Low-maintenance extension system
With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.
Power Link Plus
The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Max. lifting moment | 9.9 mt |
Max. lifting capacity | 5700 kg |
Max. hydraulic outreach | 14.1 m |
Max. manual outreach | 22.0 m |
Slewing angle | 400° |
Slewing torque | 1.3 mt |
Stabilizer spread (std) | 3.2 m |
Fitting space required (std) | 0.70 m |
Width folded | 2.33 m |
Max. operating pressure | 320 bar |
Pump capacity | 30 - 45 l/min |
Dead weight (std) | 1133 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
10.0 | 5.8 | 400 | 1.3 | 32.0 | 30-45 | 1133 | 2150 | 2325 | 700 | |
9.7 | 7.7 | 400 | 1.3 | 32.0 | 30-45 | 1243 | 2150 | 2325 | 700 | |
9.3 | 9.9 | 400 | 1.3 | 32.0 | 30-45 | 1359 | 2150 | 2325 | 700 | |
9.1 | 12.0 | 400 | 1.3 | 32.0 | 30-45 | 1464 | 2150 | 2330 | 700 | |
8.8 | 14.1 | 400 | 1.3 | 32.0 | 30-45 | 1560 | 2150 | 2380 | 735 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?