Knuckle Boom

PK 14.501 SLD 5

Knuckle Boom Crane

Imperial Metric

Max Lifting Moment 104,990 ft lbs

Max Lifting Capacity 13700 lb

Max Hydraulic Outreach 48' 7''

Technical Data

WELL-ENGINEERED HYDRAULIC- AND ELECTRONIC SYSTEMS

More power in the hook due to Single Link Plus
High operator friendliness thanks to radio remote control
Maximum utilisation of the working range due to HPSC
More lifting power due to A-HPLS
Higher payloads due to intelligent lightweight design

Downloads

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

Details

Single Link Plus

The knuckle joint on the crane's knuckle boom improves lifting power significantly in typical working positions. Developed by PALFINGER, this knuckle boom can be angled upwards providing excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.

Max. lifting moment	104990.0 ft lbs
Max. lifting capacity	13700 lb
Max. hydraulic outreach	48' 7''
Max. manual outreach	62' 4"
Slewing angle	420°
Slewing torque	11580.0 ft lbs
Stabilizer spread (std)	16' 5''
Fitting space required (std)	2' 5''
Width folded	8' 4''
Max. operating pressure	5220 psi
Pump capacity	13.2 - 18.5 gpm
Dead weight (std)	3400 lbs

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Max. lifting moment	13.2 mt
Max. lifting capacity	6200 kg
Max. hydraulic outreach	11.7 m
Slewing angle	420°
Slewing torque	1.6 mt
Stabilizer spread (std)	5.0 m
Fitting space required (std)	0.74 m
Width folded	2.55 m
Max. operating pressure	330 bar
Pump capacity	50 - 70 l/min
Dead weight (std)	1480 kg

Lifting moment (ft_lbs)	Outreach	Slewing angle (°)	Slewing torque (ft_lbs)	Pressure (psi)	Pump capacity (gpm)	Crane Weight (lbs)	Crane Height (inch)	Crane Width (inch)	Installation Width (inch)
104908.0	-	420	-	-	13.2 - 18.5	3400	87.2	100.39	29.13
102014.0	41'	420	11580	5220.0	13.2 - 18.5	3730	87.2	100.39	29.13
99120.0	49'	420	11580	5220.0	13.2 - 18.5	3990	87.2	100.39	29.13
96949.0	56'	420	11580	5220.0	13.2 - 18.5	4210	87.2	100.39	29.13
94779.0	62'	420	11580	5220.0	13.2 - 18.5	4430	87.2	100.39	31.5

Lifting moment (mt)	Outreach (m)	Slewing angle (°)	Slewing torque (mt)	Pressure (MPa)	Pump capacity (l/min)	Crane Weight (kg)	Crane Height (mm)	Crane Width (mm)	Installation Width (mm)
14.5	6.1	420	1.6	36.0	50-70	1540	2215	2550	740
14.1	8.2	420	1.6	36.0	50-70	1690	2215	2550	740
13.7	10.4	420	1.6	36.0	50-70	1810	2215	2550	740
13.4	12.6	420	1.6	36.0	50-70	1910	2215	2550	740
13.1	14.8	420	1.6	36.0	50-70	2010	2215	2550	800

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.