Heavy
PK 135.002 TEC 7
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 135.002 TEC 7
PK 135.002 TEC 7
- Gross vehicle weight of 32 t – fully equipped with 2500 to 3000 kg payload capacity (four-axle truck)
- Gross vehicle weight of 40 t – fully equipped with 8000 kg payload capacity (five-axle truck)
- High mobility due to the mounting on standard truck chassis
- Very stiff and light boom system thanks to P-Profile
- Additional applications with Power Link Plus
- More efficiency with fly-jib due to DPS Plus and DPS-C
- Maximum utilisation of the working range thanks to extended HPSC
- Increased comfort and safety due to Soft Stop
- Practical and attractive due to Functional Design
Images & Videos
P-Profile
The polygonal or drop-shaped P-Profile is especially rigid and simultaneously light weight design perfection. Thanks to self-lubricating materials, the extension boom system is low in maintenance.
PALFINGER Connected
Efficient for fleet, truck and crane - We support you in modern fleet management.
With our efficient solution we provide one digital platforms, optimized for fleet managers, crane operators and service partners. Maintain the overview, reduce administrative effort and ensure financial success for every PALFINGER equipment.
P-Fold
P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.
RTC
The new RTC (Rope Tension Control) system is an automatic rope tensioning device that helps to fold and unfold the crane. This is a further innovation from PALFINGER that will significantly shorten the set-up time.
Power Link Plus
With the 15 degree reverse linkage system, you can reach through low door openings and also work inside buildings. Heavy crane work – even in difficult conditions.
Max. lifting moment | 109.3 mt |
Max. lifting capacity | 30000 kg |
Max. hydraulic outreach | 21.9 m |
Slewing angle | ∞ |
Slewing torque with 2 gears | 10.6 mt |
Stabilizer spread (std) | 10.0 m |
Fitting space required (std) | 2.55 m |
Max. operating pressure | 385 bar |
Pump capacity | 2x 100 - 130 l/min |
Dead weight (std) | 10170 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
C | 105.0 | 10.8 | ∞ | 10.6 | 38.5 | 2x 100 - 130 | 10170 | 2600 | 2550 | 2450 |
E | 101.6 | 15.0 | ∞ | 10.6 | 38.5 | 2x 100 - 130 | 10930 | 2600 | 2550 | 2540 |
F | 100.7 | 17.2 | ∞ | 10.6 | 38.5 | 2x 100 - 130 | 11250 | 2600 | 2550 | 2600 |
G | 99.0 | 19.6 | ∞ | 10.6 | 38.5 | 2x 100 - 130 | 11530 | 2600 | 2550 | 2600 |
H | 99.2 | 22.0 | ∞ | 10.6 | 38.5 | 2x 100 - 130 | 11780 | 2600 | 2550 | 2600 |
h-pj150-e-dpsc |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?