Peterbilt

PAL Pro 72 Mechanics Truck

2019 Peterbilt 337
Stock number: PAL Pro 72 with PSC 6229
  • Mechanics Truck
  • Available
  • IN STOCK

Offer information

Location details
5125 Clay Ave. SW | Grand Rapids, MI, 49548 - United States
Dealer details
Arista Truck Systems, Inc. | Contact: AJ DeLange
Dealer E-mail
sales@aristatrucksystems.com
Dealer phone
1-800-858-3659
Availability
Available
Product type
Mechanics Truck
Stock number
PAL Pro 72 with PSC 6229

Crane body technical details

Palfinger Pal Pro 72-14 Galvaneal steel field service crane body.

  • 14' long x 97.5" overall width
  • Entire body is epoxy primed and protected by submersion electro coat process.
  • Unlike spray systems, this ensures all surfaces including interior areas are protected.
  • 60" tall compartments on the drivers side.
  • 60" tall 1st, 2nd, and 3rd compartments on passengers sides, the rest of compartments are 52".
  • Compartment outside depth is 22".
  • 50" wide treadplate cargo area floor.
  • Torsion box galvanized steel understructure. Eliminates truck & body deflection and twist.
  • Eight recessed, swiveling cargo tie downs in floor.
  • Designed for right rear crane mounting (up to a 62,000 ft. lb. crane rating).
  • 12 gauge, tread plate top on side packs with integrated full length drip rail over the doors.
  • Double panel doors with internal stiffeners, adhered with structural adhesive.
  • Stainless-steel hinge with concealed leaves and full length rod type 7/16” diameter pins.
  • “T” handle latches with seal compression feature. Three point latch rods. Powder coated black.
  • Spring loaded, over center type door stops on all vertical doors.
  • Neoprene tubular door seals.
  • Master locking system so doors don’t have to be individually locked.
  • Swing out. Vertically hinged doors on horizontal compartments for better access.
  • 14” single handed slam operating type rear tailgate.
  • 30” deep rear work bench bumper, with full width through storage compartment.
  • 5/16" thick smooth steel top with 3" overhang at rear for clamping items to the bench
  • Integrated left and right grip type steps for cargo area access.
  • Removable vise mounting bracket on the right rear corner.
  • Flexible step mounted under the driver side rear of the bumper with grab handle mounted on body.
  • Bumper is recessed and tapped to accept a pintle hook.
  • 2" receiver type hitch tube at the rear.
  • 15 ton rigid pintle hitch.
  • 7-way RV type trailer plug with flat terminals. Set up for combined brake & turn signals.

Drivers side compartments configured as follows:

  • 1st vertical compartment raised.
  • Heavy duty 250 lb. capacity C tech aluminum tool drawers with ball bearing roller slides.
  • 5) 3” drawers in the street side front compartment. (Top of the stack )
  • 2) 5” drawers in the street side front compartment. ( Middle of the stack )
  • 1) 7” drawer in the street side front compartment. ( Bottom of the stack )

2nd vertical compartment.

  • Heavy duty 250 lb. capacity, C tech aluminum tool drawers with ball bearing roller slides.
  • 5) 3” drawers in the street side front compartment. (Top of the stack )
  • 2) 5” drawers in the street side front compartment. ( Middle of the stack )
  • 1) 7” drawer in the street side front compartment. ( Bottom of the stack )

3rd vertical compartment.

  • 3) adjustable shelves.

Horizontal compartment.

  • 1) adjustable shelf.
  • 1) adjustable shelf with divider slots and 4 dividers.

Rear Vertical compartment.

  • 3) adjustable shelves.

Passengers side compartments configured as follows:

  • 1st vertical compartment raised.
  • Oxygen and Acetylene torch tank brackets in the front of the compartment.
  • Louvered compartment vent at bottom of compartment.
  • Vertical partition with 3 adjustable shelves in the rear of the compartment.

2nd vertical compartment.

  • 3) adjustable shelves.

3rd vertical compartment.

  • 3) adjustable shelves.

Horizontal compartment.

  • 1) adjustable shelf.
  • 1) adjustable shelf with divider slots and 4 dividers.

Rear Vertical compartment.

  • Crane structure with air hose reel mounting shelf.
  • 1/2” x 50’ hose reel in right rear compartment.
  • Hose access from back of body through a roller fairlead.
  • Moisture separator, oiler and regulator.

 

  • Automotive style sealed and integrated electrical system with central distribution point.
  • LED tail lights and marker lights.
  • Sealed plug in harness for the lights.
  • Tail lights in external boxes on the rear of the body.

LED interior compartment lighting. Strip lighting along the sides and over the top of the door opening.
Four LED work lights.

  • 2) mounted on the rear of the body, one on each side facing the rear.
  • 2) mounted on the top of the body at the front, one on each side.
  •  
  •  
  • Rear and front stabilizers.
  • Power out / power down stabilizers at the rear
  • Manual pull out, drop down outrigger on the front crane side only.
  • Integrated tapped mounting plates on the top of the body for air compressor, boom rest, welder, etc.
  • This eliminates the need for drilling holes through the top of the body which has potential for leaks.
  • Welder mounting plate mounted to the top of drivers side, side pack at the rear of body.
    • Note: welder not provided this is for future use.
  • Compressor mounting plate mounted to the top of drivers side, side pack at the front of body.
    Boom rest mounting plates

PAL Pro 72 Brochure Download

Service crane technical details

Pal Pro 6229 industrial field service crane

  • 62,000 ft. lb. rating.
  • Maintenance free, self aligning, hexagonal shaped boom with internal cylinders
  • All cylinders use a proprietary 5 stage marine grade seal system. ( Exceeds ANSI B30.5 )
  • 29’-2" hydraulic reach from centerline of rotation.
  • 10,800 lbs. capacity @ 3' reach. / 1,820 lbs. capacity @ 29'-2" reach.
  • 400 degree rotation.
  • Hydraulic powered planetary winch. Single line capacity 5,400 lbs. / double line 10,800 lbs.
  • Winch is mounted on the boom. Eliminates paying winch line out when raising or lowering boom.
  • 120’ of 7/16” wire rope.
  • Third wrap winch line limiting system. Ensures that at least three wraps remain on drum at all times.
  • Boom tip is clean and low profile. No anti two block bail and switch mechanism in the way.
  • Intelligent winch console. Proprietary damage protection system. No boom tip mechanisms.
  • Meets ANSI B30.5 standards
  • Radio remote hand held controller with push button switches.
  • Fully proportional hydraulic valves for fine movements.
  • Engine speed control at the remote control.
  • Engine kill at the remote control.
  • Overload shut down system.
  • Crane hook and snatch block.
  • Electric switch controls for hydraulic outriggers.
  • Crane components are grit blasted prior to paint finish process
  • Entire crane is epoxy primed and protected by submersion electro coat process.
  • Unlike spray systems, this ensures all surfaces including interior areas are protected.
  • Crane boom painted white with black cylinders.

PSC-6229 Brochure Download

Compressor technical details

Boss BA440 hydraulic drive field service air compressor.

  • 4 cylinder. 40 cfm @ 100 PSI. delivery
  • Integrated oil cooler with fan.
  • Mounted on compartment top behind driver.
  • 22 gallon under body air tank with ball valve bleeder for moisture.

Chelsea 249 series Hot shift PTO.
Tandem hydraulic pump. One half for crane, one half for compressor.

Chassis details

  • 2019 Peterbilt 337
  • PX-9 Engine
  • 300RDS Allison Transmission
  • 120" clear usable CA

Similar products

  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 39 Mechanics Truck

2019 Ford F550 SuperCab 4x4 Diesel
  • Available
  • IN STOCK

Crane Body & Service Crane only

No Chassis
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

2019 Ford F-550
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

F750 SuperCab
  • Available
  • IN STOCK

PAL Pro 39 Mechanics Truck

2018 Ram 5500 Tradesman
  • Mechanics Truck
  • Available
  • IN STOCK
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

2019 Ford F550 4x4 SuperCab
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

2019 Ford F-550
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

F550 SuperCab
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 39 Mechanics Truck

2018 Ram 5500 Tradesman
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

F550 SuperCab
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

2019 Ford F-750
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

Ram 5500 4x4 Regular Cap
  • Available
  • IN STOCK

PAL Pro 39 Mechanics Truck

2018 Ford F-550 XL
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

2019 Ford F-750
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

Ford F-750
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

2019 Ford F-750
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

2019 Kenworth T270
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

2019 Ford F-550
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

2019 Ford F750
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 43 Mechanics Truck

2018 Ford F-550 SuperCab 4x4
  • Mechanics Truck
  • Available
  • IN STOCK
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

F750 SuperCab
  • Mechanics Truck
  • Available
  • IN STOCK

PAL pro 43 Mechanics Truck

2019 Ford F-550
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 72 Mechanics Truck

2018-2019 Kenworth T370
  • Mechanics Truck
  • Available
  • IN STOCK

PAL Pro 39 Mechanics Truck

Ford F-550 Diesel