PALFINGER PALDRIVE
IN STOCK

2013 Freightliner M2 Freightliner PAL Pro 72 Mechanics Truck

Mechanics Truck

Stock number : 1FVACXDT8DDBU9190

Offer information

5125 Clay Ave. SW | Grand Rapids, MI
49548 - US
Location details
Arista Truck Systems, Inc. | Contact: AJ DeLange
Dealer details
Mechanics Truck
Product type
now available
Availability
sales@aristatrucksystems.com
Dealer E-mail
1-800-858-3659
Dealer phone

Crane body technical details

  • 14' long x 97.5" overall width
  • Entire body is epoxy primed and protected by submersion electro coat process.
  • Unlike spray sypstems, this ensures all surfaces including interior areas are protected.
  • 60" tall compartments on the drivers side
  • 60" tall 1st, 2nd and 3rd compartments on passengers sides, the rest of compartments are 52".
  • Compartment outside depth is 22".
  • 50" wide treadplate cargo area floor.
  • Torsion box galvanized steel understructure.  Elmiminates truck and body deflection and twist
  • Eight recessed, swiveling cargo tie downs in floor.
  • Designed for right rear crane mounting (up to a 62,000 ft.lb. crane rating).
  • 12 gauge tread plate top on side packs with integrated full length drip rail over the doors.
  • Double panel doors with internal stiffeners, adhered with structural adhesive.
  • Stainless-steel hinge with concealed leaves and full length rod type 7/16" diameter pins.
  • "T" handle latches with seal compression feature.  Three point latch rods.  Powder coated black.
  • Spring loade,d over center type door stops on all vertical doors.
  • Neoprene tunbular door seals.
  • Master locking system so doors don't have to be indivdually locked.
  • Factory installation.
  • Swing out.  Vertically hinged doors on horizontal compartments for better access.
  • 14" single handed slam operating type rar tailgate.
  • 30" deep rear work bench bumper with full width through storage compartment.
  • 5/16" thick smooth steel top with 3" overhang at rear for clamping items to the bench.
  • Integrated left and right grip types steps for cargo area access.
  • Removable vise mounting bracket on the right rear corner.
  • Flexible stepmounted under the driver side rar of the bumper with grab handle mounted on body.
  • Bumper is recessed and tapped to accept a pintle hook.
  • 2" receiver type hitch tube at the rear.
  • 7-way RV type trailer plug with flat terminals.  Set up for combined brake & turn signals.

Drivers side compartments configured as follows:

  • 1st vertical compartment raised 60" tall x 33 3/4" wide x 22" deep.
    • Heavy duty 250 lb. capacity C tech aluminum tool drawers with ball bearing roller slides.
    • 5 - 3" drawers in the street side front compartment (top of the stack)
    • 2 - 2" drawers in the street side front compartment (middle of the stack)
    • 1 - 7" drawer in teh street side front compartment (bottom of the stack)
    • Factory installation
  • 2nd vertical compartment 60" tall x 33 7/8" wide x 22" deep.
    • Heavy duty 250 lb. capcity, C tech aluminum tool drawers with ball bearing roller slides.
    • 5 - 3" drawers in teh street side front compartment (top of the stack)
    • 2 - 5" drawers in teh street side front compartment (middle of the stack)
    • 1 - 7" drawer in the street side front compartment (bottom of the stack)
    • Factory installation
  • 3rd vertical compartment 60" tall x 22 5/8" wide x 22" deep
    • 3 - adjustable shelves
    • Factory installation
  • Horizontal compartment 44 7/8" tall x 50 1/2" wide x 22" deep
    • 1 - adjustable shelf
    • 1 - adjustable shelf with diver slots and 4 dividers
    • Factory installation
  • Rear Vertical compartment 52" tall x 26 1/2" wide x 22" deep
    • 3 - adjustable shelves
    • Factory installation

Passenger side compartments configured as follows:

  • 1st vertical compartment raised 60" tall x 33 3/4" wide x 22" deep
    • Oxygen and Acetylene torch tank brackets in the front of the ocmpartment.
    • Louvered compartment vent at bottom of compartment.
    • Vertical partition with 3 adjustable shelves in the rear of the compartment
    • 2 swivel hooks mounted on the partition
    • Factory installation
  • 2nd vertical compartment 60" tall x 33 7/8" wide x 22" deep
    • 3 adjustable shelves
    • Factory installed
  • 3rd vertical compartment 60" tall x 22 5/8" wide x 22" deep
    • 3 adjustbable shelves
    • Factory installed
  • Horizontal compartment 44 7/8" tall x 50 1/2" wide x 22" deep
    • 1 - adjustable shelf
    • 1 - adjustable shelf with diverer slots and 4 dividers
    • Factory installation
  • Rear vertical compartment 52" tall x 26 1/2" wide x 22" deep
    • Crane structure with air hose reel mounting shelf
    • 1/2" x 50' hose reel in right rear compartment
    • Hose access from back of body through a roller fairlead.
    • Factory installation
    • Moisture separator, oiler and regulator
    • Factory installation

 

  • Automotive style sealed and integrated electrical system with central distribution point.
  • LED tail lights and marker lights.
  • Sealed plug in harness for the lights.
  • Tail lights n external boxes of the rear of the body.
  • Body harness installed at factory
  • LED interior compartment lighting.  Strip lighting along the sides and over the top of the door opening.
    • Strip lights installed at factory.
  • Four LED work lights
    • 2 - mounted on the rear of the body - one on each side facing the rear.
    • 2 - mounted on the top of the body at the front, one on each side.
    • Flood lights intalled at factory.
  • Rear and front stabilizers.
    • Power out / power down stabilizers at the rear
    • Outriggers installed at factory.
    • Manual pull out, drop down outrigger on the front crane side only.
    • Installation - bolt on   (not available for factory installation)
  • Integrated tapped mounting plates on the top of the body for air compressor, boom rest, welder, etc.
    • This eliminates the need for drilling holes through the top of the body which has potential for leaks.
  • Welder mounting plate mounted to the top of drivers side, side pack at the rear of body.
    • Note:  welder not provided - this is for future use.
  • Compressor mounting plate mounted to the top of drivers side, side pack at the front of body
  • Boom rest mounting plates
  • 67" tall cab protector
  • Body painted white to match chassis
  • Chassis ICC safety kit
  • Installation

 

PAL Pro 72 Brochure.pdf

Service crane technical details

PAL Pro PSC 6229 Field Service Crane

  • 62,000 ft.lb. rating
  • Maitnenance Free, self aligning, hexagonal shaped boom wth internal cylinders
  • All cyclinders use a proprietary 5 stage marine grade seal system (exceeds ANSI B30.5)
  • 29' 2" hydraulic rach from centerline of rotation.
  • 10,800 lbs. capacity at 3' reach | 1,820 lbs. capacity at 29' 2" reach
  • 400 degree rotation
  • Hydraulic powered planetary winge.  Single line capacity 5,400 lbs. | Double line 10.800 lbs.
  • Winch is mounted on the boom.  Eliminates paying winch ling out when raising or lowering boom.
  • 120' of 7/16" wire rope.
  • Third wrap winch line limiting system. Ensures that at least three wraps remain on the drum at all times.
  • Boom tip is clean and low profile.  No anti-two block bail and switch mechanism in the way.
  • Intelligent winch console.  Proprietary damage protection system.  No boom tip mechanisms.
  • Meets ANSI B30.5 standards
  • Radio remote hand held controller with push button switches.
  • Fully proportional hydrualic valves for the fine movements.
  • Engine kill at the remote control.
  • Overload shut down system.
  • Crane hook and snatch block.
  • Electric switch controls for hydraulic outriggers.
  • Crane components are grit blasted prior to paint finish process.
  • Entire crane is epoxy primed and protected by submersion electro coat process.
    • Unlike spray systems, this ensures all surfaces including interior areas are protected.
  • Crane boom painted white with black cylinders.
    • Note: Used crane is available upon request
  • Boom support rest
  • Installation
  • Hot shift PTO for use on Allison 3000 RDS series
  • Direct mount hydraulic pump
  • Hydraulic oil reservoir mounted in front of the bulkhead - 30 gallon capacity
  • Return line filter
  • Ball shut-off vlaves for maintenance or service
  • Includes safety decals and testing
  • Hydraulic installation kit for crane and hydraulic compressor

PSC 6229 Brochure

Compressor technical details

Boss BA440 Hydraulic Drive Field Service Air Compressor

  • 4 cylinder
  • 40 cfm at 100 psi delivery
  • Integrated oil cooler with fan
  • Mountedon compartment top behind driver
  • 22 gallon under body air tank with ball valve bleeder for moisture

Chassis details

2013 Freightliner M2